Zooz 800 Series Z-Wave Long Range On / Off Light Switch ZEN71 800LR

$28.95 $33.99

| /

Color
White
Light Almond
Brown
Black
Product Condition (See details below)

NEW 800 SERIES!

PRODUCT HIGHLIGHTS

  • Control lights from the wall switch or wirelessly with Z-Wave 
  • On / off only for instant switching (get the dimmer here)
  • 800 chip: more range, faster signal, SmartStart inclusion + S2 security
  • Z-Wave Long Range ready: extend the wireless coverage up to 1 mile if your hub supports Long Range
  • Direct 3-Way Solution: no add-on switch needed, wires just like the ZEN21 model (Neutral required, 4-Way wiring possible if direct connection to load and line are in the same box, check before buying)
  • Works well in simple single pole installations
  • Replaceable paddles (almond, brown, and black paddle kits available)
  • Small profile (just 1.1" deep) to fit easily in a crowded or shallow box
  • Adjustable LED indicator: choose the color and brightness that works for you!
  • Built-in range test tool: diagnose network issues straight from your switch
  • Scene control available on hubs that support multi-tap triggers*
  • Smart bulb mode: disable the relay for truly wireless control or use as a remote control / smart add-on switch
  • Restores on/off status after power failure
  • Compatible with LED, and incandescent bulbs (NOTE: FEIT bulbs are not recommended)
  • Don't connect to tube lights, halogen bulbs, transformers, or fans over 3A / 5 years old
  • Stronger repeater to boost your Z-Wave network
  • Use a standard-size wall plate for single gang installations (wall plate not included)
  • 5-year extended warranty (register your product here) and lifetime tech support
  • Check out Zooz Light Switches & Dimmers Frequently Asked Questions

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings for you to take advantage of this feature.

      Not sure which switch model to choose?   Read a guide to Zooz switches here!

    Here is a simplified overview of the recommended models for the most common scenarios (read the full guide above for more details):Quick guide to the recommended Zooz switch models

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, wire jumper, etc); paddles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, wire jumper, etc) or parts of the packaging; paddles are clean and don't show signs of wear; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    SPECIFICATIONS

    • Z-Wave Region: US/MX/CA
    • Power: 120 VAC, 60 Hz
    • Maximum Loads: 960W Incandescent, 150W LED and CFL bulbs, 1800W (15A) Resistive, 3A fan motors
    • Z-Wave Range: Up to 200 feet line of sight between the hub and the closest Z-Wave receiver module, up to 1 mile with Z-Wave Long Range enabled (your Z-Wave hub needs to support that feature)
    • Dimensions: 1.16" deep, 1.75" wide, 4.1" tall
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for Zooz Z-Wave Long Range On / Off Switch ZEN71 800LR (PDF)

      More wiring diagrams for 3-way and 4-way set-ups

      Zooz Light Switches & Dimmers Frequently Asked Questions

      Advanced Settings

      Support Portal

      WORKS WITH

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

      CUSTOM ENGRAVING

      You can now order a custom engraving for you smart switch paddles from our partners at Domotinc! Just click on the image below to add a custom label to the paddles and order it directly from Domotinc. NOTE: custom etched paddles are NOT included with your purchase on The Smartest House.

      Zooz Switch with custom engraved label


      INSTALLATION

      Before installing, make sure the load does not exceed 960W for incandescent lights, 150W for CFL's and LED's, or 1800W (15A) for resistive load. Check your wiring first to confirm that you have all the following wires present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

      If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

      Zooz Z-Wave Plus On / Off Light Switch ZEN21 VER 4.0 Single Pole Wiring Diagram

      Here are some helpful wiring tips:

        • Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN71 switch to work without a neutral wire.
        • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

      How to include the Zooz On / Off switch to your smart home network?
      1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
      2. Put your Z-Wave controller in inclusion/pairing mode
      3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
      4. A new on/off switch should appear on your controller's device list

       NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches.

      SHOP COLOR PADDLES

      Shop On Off Switch Replacement Paddles

      Customer Reviews

      Based on 86 reviews
      97%
      (83)
      2%
      (2)
      0%
      (0)
      0%
      (0)
      1%
      (1)
      M
      Mike Dobbs
      bad devices(2), no phone and poor customer service

      1st Zoos switch the load screw was frozen. replacement DOA. Customer service had me draw the circuit out. I’ve installed thousands of switches in past work assignments. Will not buy again from this site

      Thank you for sharing your experience with us! Our records show that a replacement for the switch with the terminal screw issue was dispatched promptly when you reached out about the issue. Our records also show that our team replied to each response from you expediently, and phone support, while it was not requested in your communication with us, is available by appointment as noted on our website.
      For the replacement unit that was noted as DOA, we do encourage standard troubleshooting steps, including checking the connected load and wiring setup, as these are essential checks for all of our switches and required for an advance replacement.
      To provide some context, every Zooz switch undergoes thorough testing at the factory for both physical integrity and Z-Wave functionality, and the failure rate for correctly installed switches with compatible loads is under 1%. I apologize if our troubleshooting steps seemed extensive, but our technicians request wiring images for all advanced replacements to ensure the correct solution is provided and to help prevent similar issues in the future.
      Reviewing wiring configurations allows our technical team to diagnose any underlying factors that may have contributed to the original issue, which enables us to address potential causes and deliver a more effective solution for you.

      M
      Moshe Rottenberg

      Very good experience

      J
      Jgwok
      Good Addition

      Simple to install and works well. Continue to be happy with this set up

      D
      Daniel Segovia
      Works great

      The switch works great, it was easy to hook up and button presses are super responsive.

      S
      Scott
      Easy setup

      Installation is straightforward, config with HomeAssistant is now super easy (just scan the QR code), and reliability with all Zooz products (I currently have 31) has been flawless so far.