Perfect on/off switch module.
- Turns an existing on/off light switch into a Z-Wave switch
- Remote and manual ON/OFF control
- Small size - fits a standard gang box with no issues
- Pigtails for easy installation. Requires a neutral wire
- Built-in Z-Wave range extender
HOW IT WORKS
The ZWN-RSM1S Z-wave Smart Single Relay Switch Module is a perfect wireless manual and remote on/off switch module to control your lighting system. It can be used as a relay for wireless control only or turn an existing switch into a Z-Wave switch when included to your gateway controller (sold separately).
As part of any Z-wave network, each device will be manually and/or remotely controlled by commands sent from z-wave controllers in real time, but also act as wireless repeater transmitting RF signal from one to another intended device, then extending the range of RF signal all over the system.
Please read the installation manual carefully before installing the module. If you are unsure how to identify the wiring, consult a licensed electrician.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Voltage: 120-277 VAC, 50/60 Hz
Maximum load: 10 Amp
Signal Frequency: 908.42 MHz
Size: 2.02'' x 1.71" x 0.82"
Range: Up to 100 feet in open-air and line of sight distance, depending on obstacles and blocks
Operating Temperature: 32°F-104°F (0°C-40°C), Indoor Use
Standards and Compliance: Z-Wave Certified FCC Part 15, Class B
ZWN-RSM1S User Manual (PDF)