GET ADDITIONAL POWER CONTROL FROM ANYWHERE IN YOUR HOUSE.
- Create Your Own 3-Way Setting Through Wireless Communication
- Worry-free Installation
- Built-In Z-Wave Signal Repeater
HOW IT WORKS
Install the the LTM-5 switch in any outlet and include it to your Z-Wave Gateway Controller. Create a scene with the LTM-5 any any other Z-Wave light switch or receptacle to add manual and remote control to a power source. The device communicates on/off and dimming signals to the units it's paired with, it does not require to be hard-wired with any of the other switches in a 3-way or 4-way configuration. Put the LTM-5 in your bedroom and turn the lights off in your basement even if you forgot your cell phone downstairs.
You can wire the LTM-5 anywhere power is available, all you need is neutral and line connection. Carefully follow instructions in the diagram on the left and remember: check for neutral connection in your gang box before purchasing the switch. Once securily placed in an outler, include the LTM-5 in your Z-Wave network and set up a scene with any other smart home on/off switch, receptacle, or module to control the load remotely and manually.
Z-Wave Frequency: 908.42 MHz
Power: 120 VAC, 60 Hz
Range: Up to 100 feet line of sight between the Controller and /or the closest Z-Wave Device.
Z-Wave Version: 4.52