Qubino Z-Wave Plus Universal Relay Module with Dry Contact Switch ZMNHND3

POWERFUL AUTOMATION

PRODUCT HIGHLIGHTS

• Dry contact switch with versatile applications
• The smallest module on the market will fit behind any wall switch
• Perfect for automating your garage door, sprinklers, or gas fireplace!
• Control all types of bulbs and small appliances
• Enjoy auto-inclusion and add the module to your Z-Wave network within seconds
• Works with toggle and push-button (momentary) switch types
• Set the device to automatically turn on or off after a fixed period of time*
• Restores on/off state after power failure
• Made in Europe from high-quality components
• 2-year warranty

NOTE: Z-Wave gateway controller required - sold separately. *Your controller needs to support advanced configuration and parameter input to display these features.

GET ACCESSORIES

HOW IT WORKS

The Qubino Flush 1D Relay is a dry contact switch that enables remote on/off control of lights and small appliances. With a voltage-free output contact, different power supply loads under 10A can be connected to the module.

When included with your Z-Wave gateway controller, you’ll be able to check the on/off status of connected devices, and remotely control them from the ease of your smart phone or computer. Create personalized lighting schedules — like turning off the lights in the baby’s room at the same time every evening — to save on utilities and enjoy a comfortable routine.

This 1D Relay may also be paired with other Z-Wave devices for advanced home automation scenarios: open the garage door as soon as you leave your house in the morning. This module also acts as a Z-Wave signal repeater to strengthen your network. 

INSTALLATION

• Follow the diagrams in your user manual exactly. If you are unfamiliar with electrical wiring, please contact a qualified and licensed electrician to install your 1D relay. 
• Do not exceed the recommended loads — failure to do so may result in injury and equipment damage.
• Before installation, make sure electrical power is completely disconnected and the main fuse disabled. 

If including the module to your Z-Wave network automatically, then be sure to set your Z-Wave gateway controller into inclusion mode BEFORE you connect the device to a power supply. Auto-inclusion will occur within 5 seconds of connection to the power supply.

If you miss the auto-inclusion window, add the module to your Z-Wave network manually. First, connect the device to a power supply. Put your controller in inclusion mode, then toggle the switch connected to the I1 terminal 3 times within 3 seconds. Once successfully included into your Z-Wave network, the module will appear on your controller’s device list.

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Frequency: 908.42 MHz (US)
• Power Supply: 110VAC (24VDC)
• Maximum Load for 110VAC: 2300 W / 10A
• Maximum Load for 24VDC: 240 W / 10A
• Power Consumption: 0.4W
• Operating Temperature: 14 - 104 F
• Dimensions: 1.6" x 1.4" x 0.6"
• Weight: 1 oz

RESOURCES

Download the Manual for Qubino Z-Wave Plus Flush 1D Relay Module ZMNHND3 (PDF)