Aeotec by Aeon Labs Z-Wave Plus WallMote Scene Controller ZW129

Smooth Scene Control

Aeotec WallMote is a Z-Wave Plus certified device  This is a Gen5 Z-Wave Plus Product

PRODUCT HIGHLIGHTS

    • Activate up to 8 smart home scenes or Z-Wave devices
    • 3 helpful control indicators: discreet beep, RGB LED, and vibration (customize them if your hub allows for advanced parameter adjustments)
    • Powered by rechargeable battery with convenient micro USB access
    • Worry-free installation with magnetic wall plate
    • Secure signal encryption
    • 12-month warranty

NOTE: Z-Wave gateway controller required - sold separately.

HOW IT WORKS

This Aeotec WallMote may look as sleek and inconspicuous as a pair of ordinary wall switches, but don’t let looks deceive you: use the WallMote to masterfully control up to 8 unique Z-Wave scenes of your own design. Connect the WallMote to your Z-Wave controller to assign each device or group of devices to a quick action on one of the WallMote’s side-by-side panels: tap, press and hold, swipe up, and swipe down for easy control of your smart home.

Manage all aspects of your smart home and have them work together. Swipe up to initiate your very own bedtime scene: instantly dim the lights, set the thermostat, and close the blinds for a peaceful evening routine. Press and hold the right panel for a soothing “Wintertime Welcome” scene: close the garage door, turn on the downstairs lights along with some music, and turn up the heat. Commands are registered and actions confirmed via communicative RGB LED, beep, and vibration. The WallMote is powered by convenient rechargeable battery along with an optional micro USB cable. Bank-grade AES signal encryption ensures communication is safe and secure, while the latest in Z-Wave Plus technology means faster connectivity and longer range for your WallMote.

INSTALLATION

To include the WallMote to your Z-Wave network, first put your Z-Wave hub into pairing/inclusion mode (see your hub’s user manual for specifics, as each brand is different). Bring the WallMote within 3 feet of your hub. On the back of the device, press the Action Button once. The LED indicator will blink green. Once successfully included, the LED will light up solid green for 2 seconds and then turn off; you should see the new device on your hub’s device list. If the process was unsuccessful, the LED will light up solid red for 2 seconds and then turn off. If so, please repeat the steps above.

Once included, mount the WallMote in the location of your choice. Be sure it’s within range of your Z-Wave hub. Peel one side of the double-sided tape and attach it to the designated section on the back of the mounting plate. Press it down firmly and evenly to affix the back mounting plate to a wall or any clean, dry, and flat surface.

Once the mounting plate is secured, attach the WallMote to the plate. Attach the device by gently pushing the WallMote onto the plate from the top-left corner. The device will be attracted by the corresponding magnets on the plate and stay put

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

  • Z-Wave Frequency: 908.42 MHz (US)
  • Power: Rechargeable lithium battery, 3.7 V, 640mAh
  • Battery charger input: Micro USB port, DC 5V±0.5V, max 1A.
  • Operating temperature: 32 - 104 F (0 - 40 C)
  • Z-Wave Range: up to 100 feet (line of sight)
  • Dimensions: 3” x 3” x 0.35"
  • Weight: 2 oz
  • Installation: Indoor Only

RESOURCES

Download the Aeotec by Aeon Labs Z-Wave Plus WallMote Scene Controller ZW129 User Manual (PDF)

Download the Aeotec by Aeon Labs Z-Wave Plus WallMote Scene Controller ZW129 Technical Specifications (PDF)

How to use the Aeotec by Aeon Labs Z-Wave Plus WallMote Scene Controller ZW129 with SmartThings (PDF)

How to use the Aeotec by Aeon Labs Z-Wave Plus WallMote Scene Controller ZW129 with Vera (PDF)


Customer Reviews

Based on 1 review Write a review

Related Items