Aeotec by Aeon Labs Z-Wave Plus WallMote Quad Scene Controller ZW130

Full Control at Your Fingertips

Fibaro Button is a Z-Wave Plus device   This is a Gen5 Z-Wave Plus Product

PRODUCT HIGHLIGHTS

    • Control 16 different scenes or Z-Wave devices
    • Click, long-press, or slide to activate automation scenarios and dim associated Z-Wave lights
    • 3 unique action indicators: RGB LED, beep, and vibration (customize if your controller supports this feature)
    • Built-in rechargeable battery with easy micro USB access
    • Simple and elegant installation 
    • Attaches to wall plate with a magnet
    • Bank-grade AES-128 encryption for safer communication
    • OTA - update the firmware over the air if your controller supports this feature
    • 12-month warranty

NOTE: Z-Wave gateway controller required - sold separately.

HOW IT WORKS

The Aeotec WallMote looks like a simple sleek wall switch, but endless utility hides behind its modern design. This WallMote is a Z-Wave scene controller, capable of commanding up to 16 different scenes and more than 15 unique devices within each scene. When connected to your Z-Wave gateway controller, get creative with personalized control combinations of your lights, appliances, and Z-Wave devices.

Create clusters of actions for specific scenarios: bed-time approaching? Simply click the WallMote to lock the front door, turn off all downstairs lights, and adjust the thermostat to your preferred night setting. Ready for movie night? Touch and swipe your WallMote to dim the lights and turn on your entertainment center. Have the commands be as simple or advanced as you like: the options are virtually limitless.

The WallMote responds to simple touch, long-touch, and touch slide functions; it communicates back to you with LED responses, vibrations, and beeps for easy functionality.

INSTALLATION

Before mounting your WallMote, you will need to include it into you Z-Wave network. Do so by putting your Z-Wave gateway controller into inclusion/pairing mode. Bring the WallMote in direct range of your controller or add it in its target location if your controller supports network-wide inclusion. Press the Action Button on the back of the device; the LED will blink green. Once successfully included, the green LED will hold for 2 seconds and then turn off. If pairing was unsuccessful, a red LED will hold for 2 seconds and then turn off — in this event, make sure you have strong network connectivity and repeat the steps above.

How to mount the Aeotec by Aeon Labs Z-Wave Plus WallMote Quad Scene Controller ZW130
Choose a wall or surface on which to mount your WallMote. Before anything, make sure the spot is clean, dry, and free of oil and dust particles. With the included double-sided tape, peel one side and attach it to the back of the Back Mounting Plate. Then, firmly attach the Plate to the desired surface.

Next, insert the WallMote into the corresponding Mounting Plate. Starting from the Plate’s top-left corner, push the main unit into the Mounting Plate. The WallMote should then detect the magnets on the Mounting Plate and snap into place.

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

  • Z-Wave Frequency: 908.42 MHz (US)
  • Power: Rechargeable lithium battery, 3.7 V, 640mAh
  • Battery charger input: Micro USB port, DC 5V±0.5V, max 1A.
  • Operating temperature: 32 - 104 F (0 - 40 C)
  • Z-Wave Range: up to 100 feet (line of sight)
  • Dimensions: 3” x 3” x 0.35"
  • Weight: 2 oz
  • Installation: Indoor Only

RESOURCES

Download the Aeotec by Aeon Labs Z-Wave Plus Wall Mote Quad Scene Controller ZW130 User Manual (PDF)


Customer Reviews

Based on 1 review Write a review

Related Items