The Aeon Labs Micro Smart Energy Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches.
It can also report immediate wattage consumption or kWh energy usage over a period of time.
The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection.
In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.
It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Specifications: 110V 60Hz input, 1100W or 10A max output
Aeotec DSC18103-ZWUS Micro smart Energy switch G2 Manual (PDF)