Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR

$28.95 $35.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)

2 Relays in 1

PRODUCT HIGHLIGHTS

  • Save space and money with this smart double relay
  • Control 2 switches with 1 Z-Wave device: connect the double relay to 2 120V loads for independent smart control from your Z-Wave hub or wall switch
  • Great for double gang box switch automation or to add Z-Wave to a fan / light installation for individual control of the motor and bulbs
  • Wires behind the wall switches or at the fixture (if you don't have a neutral in the switch box)
  • 700 series Z-Wave: the latest tech for faster communication and better range
  • Long Range: if your hub implements Z-Wave Long Range, you'll benefit from the latest direct device-to-hub communication which extends the range like never before and eliminates network lags (note that versions for regions outside of US/CA/MX don't come with LR)
  • SmartStart with S2 authenticated security with encrypted signal
  • Pigtail wires for easy installation
  • Smart bulb mode: disable manual and/or Z-Wave control and turn your smart bulbs on or off using wireless signal only
  • Scene control: 7 multi-tap triggers available for each relay (available on hubs that support multi-tap triggers*)
  • Multicolor LED indicator to guide you through the set-up process
  • Compatible with quality LED and incandescent bulbs (don't connect to ballast tube lights, switched receptacles, or fans over 1/4 hp; NOTE: FEIT bulbs are not recommended)
  • Acts as a Z-Wave extender: get more signal for your network with this 700 series repeater
  • 5-year extended warranty (once registered) and lifetime tech support

    NOTE: Z-Wave gateway controller required - sold separately. *Your smart hub / controller needs to support advanced settings and central scene programming for you to take advantage of this feature.

    PRODUCT CONDITION

    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description, may not feature Z-Wave Long Range.

    Z-WAVE FREQUENCY

    This product is available in different Z-Wave frequencies so please make sure you choose the correct region before checking out. You need to select the same frequency / region as your hub when buying Z-Wave devices for them to include to your system. If you're not sure which frequency your hub operates on, please contact your solution provider first. Here is what each option stands for:

    • US/CA/MX: 908.42 MHz (used primarily in US, Canada, and Mexico, the default option for all products)
    • EU/UK: 868.42 MHz (used primarily in Europe) - no Z-Wave Long Range

    INSTALLATION

    Before wiring the Double Relay in, check that the load does not exceed 500W for incandescent lights, 150W for LED's, 1/4 hp for fans and motors, or 5A for resistive load per relay. Examine all connections to verify that you have all the necessary wires available in the switch box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).

    If you are not comfortable identifying the wiring and following the instructions, please hire a licensed electrician.

    Zooz ZEN52 Double Relay Single Pole Wiring Diagram

    Here are some helpful wiring tips:

      • Make sure the gang box you are about to install the switch has a neutral wire available - you will not be able to get the ZEN52 double relay to work without a neutral wire. If neutral is not available, you'll need to install the ZEN52 at the light fixture / in the fan canopy.
      • Unlike regular mechanical switches, Z-Wave switches require all of the wires to be connected exactly as indicated - line and load wires can never be swapped as it sometimes happens to the most experienced electricians.

    How to include the Double Relay to your smart home network?
    1. Put your Z-Wave controller in inclusion/pairing mode
    2. Click the Z-Wave button on the relay 3 times quickly to finalize the inclusion process (and scan the SmartStart security QR code or enter PIN if prompted)
    3. Two new on/off switches and a master device should appear on your controller's device list

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

    • Z-Wave Region: US/CA/MX, EU/UK (no Z-Wave Long Range)
    • Power: 120-240 VAC, 50/60 Hz
    • Maximum Loads: 500W incandescent, 150W LED bulbs, 5A resistive, 1/4 HP fan motors per channel
    • Z-Wave Range: Up to 300 feet line of sight (up to 1300 feet with Z-Wave Long Range)
    • Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
    • Operating Temperature: 32-104° F (0-40° C)
    • Installation: Indoor use only

      RESOURCES

      Download the Manual for Zooz 700 Series Z-Wave Long Range Double Relay ZEN52 LR (PDF)

      Advanced Settings

      Support Portal


      Next Previous

      Customer Reviews

      Based on 11 reviews
      91%
      (10)
      9%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      R
      Roger Braden
      Works as advertised

      Nice item

      J
      Jon B.
      Zooz DR review

      4 Stars. I've purchased two of their double relay. Overall I think Zooz has the best prices for Z-wave products in general, but there is a limit to what you get.

      One of the Zooz double relays stopped responding/working correctly and my light was stuck on (I could not change through commands (hubitat elevation) nor by the physical switch connected to the relay) I have disconnected the relay from the hub and cycled power through the breaker to fix it, but I have yet to reconnect that relay to my hub to run automations on that relay.
      I have a second one that I've installed without any issues so far as well.

      I still recommend this double relay for the size and price point.

      C
      CW
      Update Firmware to v1.70 for the Best Experience

      I've owned my Zen52 for 15 months and the only thing I didn't like about the device was how slow it was to turn on from the light switch. I use toggle style switches and when I would flip the switch and it would turn on a second later. This was extremely noticeable considering I had used shelly relays and ZigBee relays which would turn on instantly using the same switches. It was also extremely annoying considering this was the only switch in my house that I physically interact with. After upgrading the firmware to v1.70 and setting parameter 12 to 0 I am happy to report my Zen52 now turns on and off instantly as expected. I also feel good knowing that if I change switch types I can change the settings later. Overall I am happy with my purchase.

      R
      Ryan
      Great relay for fans!

      Using to make my "dumb" ceiling fan and light smart - works great and hides in the fan enclosure!

      R
      Robin
      Perfect!

      The Relay is the smallest one I ever seen. While it's so powerful, stable and easy installed. I highly recommend it.