Zooz Z-Wave Plus Dimmer Toggle Switch ZEN24 (Garage Sale)

ENHANCED DIMMER SWITCH

 DISCONTINUED PRODUCT:  SHOP NEW VERSION HERE

PRODUCT HIGHLIGHTS

• MIXED INVENTORY: May come in VER. 2.0 (no scene control or OTA updates) 3.0, or 4.0. You may receive different versions in the same order.
•  GARAGE SALE DEAL:  final sale, not eligible for return, exchange, or refund. 6-month limited warranty. This is the final part of our inventory, we will NOT be restocking this version in the future.
• Manual or remote on/off control and dimming from your mobile device or computer (when included to a Z-Wave gateway controller)
• Direct 3-Way Solution: Wire it with a regular light switch for 2-point control, no need to buy a dedicated switch! (Neutral wire required, on/off control only from slave switch, use in 4-Way only if direct connection to load and line are in the same box)
• Fully adjustable tamp rate, and more advanced settings*
• White (no other color available)
• Z-Wave Plus with improved 500 chip for faster and safer wireless communication
• Extended LED bulb compatibility - use it with quality dimmable LED's (including Cree, Ecosmart, GE, Philips, Sylvania, Sunco, and others. NOT COMPATIBLE WITH LUMINUS, LITHONIA, OR FEIT BULBS.)
• Based on universal command classes - supported by most Z-Wave controllers
• May be associated and grouped with other Z-Wave devices for advanced home automation
• Built-in Z-Wave signal repeater for a stronger and more reliable network
• Check out Zooz Light Switches & Dimmers Frequently Asked Questions

NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support

PRODUCT CONDITION

We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

• NEW: brand new product, as delivered by the factory
• OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
• REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, neutral jumper, etc); toggles are always clean without signs of use; hardware and firmware version may be different than the brand new device description
• USED: used condition, may show signs of wear, may not include accessories (like product manual, wire caps, etc) or parts of the packaging; paddles are clean and don't show signs of wear.

 FINAL SALE:  not eligible for return, replacement, or refund. Limited 6-month warranty.

HOW IT WORKS

Extend bulb life and save money on energy bills with this smart dimming solution. This device is equipped with built-in signal repeater and Z-Wave Plus chip, providing greater range and more reliability.

INSTALLATION

Make sure the load you are about to connect does not exceed 600W for incandescent lights or 150W for DIMMABLE CFL or LED.
Check your wiring first and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and completing the installation, please consult a licensed electrician.

Here are some helpful installation tips:

• Make sure the gang box you are about to install the switch at features a neutral wire - you will not be able to connect the ZEN24 dimmer correctly without a neutral wire.
• Unlike your regular electric switches, Z-Wave switches require particular wires to be connected exactly as indicated - line and load wires cannot be swapped as it often happens to the most experienced electricians.

How to include the Z-Wave Plus Dimmer Toggle switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the dimmer switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Toggle the switch up quickly 3 times to finalize the inclusion process
4. A new dimmer device should appear on your controller's device list

 NOTE:  Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches.

WORKS WITH

• 2GIG (no advanced settings available)
• ADT Pulse (no advanced settings available)
• Almond (Securify)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant
• HomeSeer
• Hubitat
• InControl
• Indigo
• ISY994Zw
• Jeedom
• openHAB
• Open Z-Wave
• Piper (no advanced settings - on/off control only)
• Ring (no advanced settings or scene control)
• SmartThings Hub (officially certified for basic control with local connection, access advanced settings and scene control with custom device handler, click here to download)
• Staples Connect DLink (no advanced settings - on/off control only)
• VeraEdge Z-Wave Gateway Controller (no scene control)
• VeraLite Z-Wave Gateway Controller (no scene control)
• VeraPlus Z-Wave Plus Advanced Home Controller (no scene control)
• VeraSecure (no scene control)
• Wink and Wink 2
• Zipato ZipaTile Home Automation Controller

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Model Number: ZEN24
• Z-Wave Signal Frequency: 908.42 MHz
• Power: 120 VAC, 60 Hz
• Maximum Loads: 600W Single-gang, 500W Double-gang, 400W Triple-gang Incandescent, 150W CFL or LED
• Range: Up to 100 feet line of sight
• Operating Temperature: 32-104° F (0-40° C)
• Installation and Use: Indoor only

RESOURCES

Download the Manual for Zooz Z-Wave Plus Dimmer Toggle Dimmer ZEN24 VER. 4.0 (PDF)

Click here for 3-Way Diagrams for Zooz Z-Wave Plus Dimmer Switch ZEN24 VER 4.0