We put together this simple solution for smart monitoring of your existing smoke alarms to make your life easier and safer. Just connect the 3 pigtail wires to the last smoke alarm in series, add the Zooz relay to your Z-Wave hub, and receive status notifications in the app whenever any of your smoke alarms is triggered. Make sure your detectors are interconnected. Click here for step-by-step installation instructions.
This small 700 series Z-Wave relay is perfect for 120 V signal monitoring. It will send an on report to your hub whenever the smoke alarm is triggered and will turn back off when the alarm is cleared. You won't control it other than to set it in the off position right after installation.
Optionally, you can connect a 120 V or a dry contact load to be triggered by the ZEN51 relay anytime the alarm goes off. It could be a strobing light or an outdoor siren to boost the alert. This device is not equipped with battery back-up so it will not function during a power failure.
Find out more about the Zooz 700 Series ZEN51 Dry Contact Relay