NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support
Extend bulb life and save money on energy bills with this smart dimming solution. This device is equipped with built-in signal repeater and Z-Wave Plus chip, providing greater range and more reliability.
Make sure the load you are about to connect does not exceed 600W for incandescent lights or 150W for DIMMABLE CFL or LED.
Check your wiring first and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and completing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the Z-Wave Plus Dimmer Toggle switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the dimmer switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Toggle the switch up quickly 3 times to finalize the inclusion process
4. A new dimmer device should appear on your controller's device list
NOTE: Use a dedicated diagram from the manual to wire the switch in a 3-way setting with a regular electrical switch if you are looking to control one light with 2 switches.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.