NOTE: Z-Wave gateway controller required - sold separately. *Your controller needs to support advanced configuration and parameter input to display these features.
We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:
FINAL SALE: not eligible for return, replacement, or refund. Limited 6-month warranty.
The Qubino Flush 1D Relay is a dry contact switch that enables remote on/off control of lights and small appliances. With a voltage-free output contact, different power supply loads under 10A can be connected to the module.
When included with your Z-Wave gateway controller, you’ll be able to check the on/off status of connected devices, and remotely control them from the ease of your smart phone or computer. Create personalized lighting schedules — like turning off the lights in the baby’s room at the same time every evening — to save on utilities and enjoy a comfortable routine.
This 1D Relay may also be paired with other Z-Wave devices for advanced home automation scenarios: open the garage door as soon as you leave your house in the morning. This module also acts as a Z-Wave signal repeater to strengthen your network.
If including the module to your Z-Wave network automatically, then be sure to set your Z-Wave gateway controller into inclusion mode BEFORE you connect the device to a power supply. Auto-inclusion will occur within 5 seconds of connection to the power supply.
If you miss the auto-inclusion window, add the module to your Z-Wave network manually. First, connect the device to a power supply. Put your controller in inclusion mode, then toggle the switch connected to the I1 terminal 3 times within 3 seconds. Once successfully included into your Z-Wave network, the module will appear on your controller’s device list.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.