Zooz Z-Wave Plus Door Window Contact Sensor ZSE08

Discreet Security

Strips is a Z-Wave Plus certified device

Product highlights

    • Open/close detection for doors, windows, cabinets, and drawers
    • Wireless notifications and event triggers (when included to a Z-Wave gateway controller)
    • Scene inclusion and direct association for custom automation scenarios
    • Low battery alerts
    • Z-Wave Plus with improved 500 series chip for faster and safer wireless communication
    • Small & discreet design
    • Fast, simple installation process
    • 1-year warranty

NOTE: Z-Wave gateway controller required - sold separately. 

How It Works

The Zooz Contact Sensor allows you to protect your home easily, discreetly, and cost-effectively. When connected to your Z-Wave gateway controller, it will tell you exactly if and when a door or window has been opened.

Attach it to a kitchen cabinet to make sure your little ones don’t reach anything they’re not supposed to. Put it on a drawer to safeguard your valuables. Receive instant text/email notifications on your smart phone or laptop so that you’re always kept in the loop, no matter where you are.

Use the sensor to speak to other Z-Wave security devices, like triggering a Z-Wave alarm siren when the backdoor is opened unexpectedly. With features like low-battery alerts and Z-Wave Plus for faster and safer connectivity, know the Contact Sensor will always be there when you need it.


To add the Contact Sensor to your Z-Wave network:

1. Bring the sensor within direct range of your controller.
2. Carefully remove the cover from your Contact Sensor.
3. Remove the plastic pull-tab from the battery slot. The LED indicator will begin to blink slowly.
4. Put your Z-Wave gateway controller into inclusion/pairing mode.
5. Press and release the Z-Wave button on the sensor 3 TIMES QUICKLY. The LED indicator will flash quickly.
6. A new open/close (door/window) sensor will appear on your controller’s device list.

After successfully including the sensor into your Z-Wave network, there are 2 ways to mount it to the spot of your choosing (like a door or window frame, or inside a cabinet door or drawer). Use the screws provided to mount the sensor to the frame and the magnet to the moving part of your door/window (recommended). OR, you can use the supplied adhesive tape.

Zooz Z-Wave Plus Contact Sensor ZSE08 Installation Tip
NOTE: Make sure the orientation marks are facing each other, and the gap between sensor and magnet does NOT excess 0.75” when the device is in the closed position.


NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


    • Z-Wave Frequency: 908.42 MHz (US)
    • Power: 1 CR2 battery (included)
    • Power Consumption: 0.13W
    • Wireless Range: Up to 100 feet
    • Operating Temperature: 32° - 104°F (0°- 40°C)
    • Installation and Use: Indoor use only
    • Dimensions: 2.75” x 0.75”
    • Weight: 0.5 oz.


Download the Zooz Z-Wave Plus Contact Sensor ZSE08 User Manual (PDF)

Next Previous

Customer Reviews

Based on 2 reviews Write a review

Related Items