Aeotec by Aeon Labs Z-Wave Plus RGBW LED Strip ZW121
Millions of smart colors
Fully dimmable RGBW Z-Wave LED Strip
16.5 feet of bright colors to vitalize any interior
Find the perfect ambiance among 16 million shades of light
Low energy consumption with the latest LED technology
Make it as shiny or discreet as you wish - it's only 0.12" thick
Cut it to fit your needs
Z-Wave Plus boosts wireless communication
AES-128 secure signal encryption
Over-the-air firmware updates available if your controller supports OTA
NOTE: Z-Wave gateway controller required - sold separately.
HOW IT WORKS
Never has a simple lighting solution had so much potential. With this Aeotec RGBW LED Strip, transform the kids’ playroom into a vibrant and dynamic space. Set the vibe for all kinds of parties and events. Be the most festive house on the block anytime there’s occasion to celebrate. And that’s just the color potential: This LED technology is made with 15 different diodes to create a rich spectrum of white natural light. Enjoy ongoing, perfect ambiance by scheduling various shades of white light to respond to the time of day.
When included to your Z-Wave gateway controller, remotely and selectively control all of your home’s LED Strips through the ease of your smart phone, computer, or Z-Wave scene controller. Schedule them, automate them, turn them on or off, and dim them to your liking. These narrow and limber LED Strips can be installed almost anywhere and are easy to conceal.
Before installing and including the LED Strip to your Z-Wave network, be sure to familiarize yourself with the device diagrams in your operational manual.
First, connect the LED Strip with the LED Strip Controller. Plug the Power Adapter into the Strip Controller. Then plug the Power Adapter into an electrical outlet. Once connected to the power source, the Network LED on the Strip Controller will blink slowly. This indicates it can now be included into your Z-Wave network. To make sure the Strip and Controller are properly connected, press the Action Button a few times to toggle the Strip on and off.
To include the LED Strip into your Z-Wave network, put your Z-Wave gateway controller into inclusion mode. Then, press and release the Action Button on the back of the LED Strip Controller. If pairing was successful, the Network LED will be solid. If unsuccessful, the LED will light up red for 2 seconds — simply repeat the process above after ensuring you have strong network connectivity.