NOTE: Z-Wave gateway controller required - sold separately. *Your hub needs to support advanced parameter input for this feature to work.
Install the ZEN23 on/off switch in place of your existing light switch and include it to your Z-Wave controller. You can now enjoy both manual and wireless control of the lights or small appliances connected to the Z-Wave switch.
Enjoy the unique Direct 3-way Solution and use the ZEN23 in existing 3-way locations. As long as neutral is present in all boxes, you'll be able to wire this smart switch with your regular mechanical switches, no need to buy additional equipment! Just follow the wiring diagrams from the manual carefully and contact us with any questions for quick help and advice.
If your smart home system allows for advanced automation, you will be able to group this switch with other Z-Wave devices to create unique lighting scenes and custom events. You will never walk into a dark home again. You will never have to get up from bed to turn the lights downstairs.
Use this switch for smarter energy management and added convenience. Z-Wave Plus protocol makes this device more reliable than ever. With its built-in signal repeater, the switch will also make your whole smart home network stronger.
Make sure the load you are about to connect does not exceed 960W for incandescent lights, 150W for LED's, or 1800W (15A) for resistive load. Review your wiring carefully and confirm that you have all of the following present in your gang box: load (most often black), line (most often black), neutral (most often white), and ground (most often green).
If you are not comfortable identifying the wiring and completing the installation, please consult a licensed electrician.
Here are some helpful installation tips:
How to include the Z-Wave Plus On / Off Toggle switch to your smart home network?
1. Bring your Z-Wave gateway hub or controller as close to the switch as possible
2. Put your Z-Wave controller in inclusion/pairing mode
3. Toggle the switch UP 3 times as quickly as possible to finalize the inclusion process
4. A new on/off device should appear on your controller's device list
NOTE: Please use a dedicated wiring diagram to connect this switch in a 3-way setting with a regular electrical switch if you'd like to control one light with 2 or 3 switches.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.