Zooz Z-Wave Plus S2 On / Off Wall Switch ZEN26 VER. 3.0 with Simple Direct 3-Way & 4-Way

Simple & Smart Switch

PRODUCT HIGHLIGHTS

• Manual and wireless on/off control for lights via Z-Wave
• Simple Direct 3-Way & 4-Way: Still no add-on needed, but now you can use it in a 4-way or 5-way with load and line in separate boxes! Quicker and easier installation. (Neutral wire required)
• Scene Control:  trigger scenes and devices with multi-tap (select hubs only)
• VER. 3.0: no heat sink tabs for easier fit in the switch box
• White (no other color available)
• Use with standard light fixtures only (NO fans, receptacles, or tube lights)
• Instant on/off status reports
• S2 security for hacker-proof smart home
• Update firmware via OTA anytime in the future to keep your device up to date with latest technology
• Smart LED indicator makes pairing and set-up more intuitive (now control the LED mode with 6 clicks of any paddle!)
• Acts as a signal repeater to boost your Z-Wave mesh
• Z-Wave Plus chip for better range and less latency
• Restores status after power failure
• Compatible with LED, CFL, and incandescent bulbs (NO fans)
• Use a standard-size wall plate for single gang installations (wall plate not included)
• 1-year warranty and lifetime tech support

NOTE: Z-Wave gateway controller required - sold separately.

INSTALLATION

Please follow the manual guidelines and diagrams when installing your Zooz S2 switches. It's recommended that a licensed electrician performs the installation.

Check for neutral wires BEFORE purchasing. One white wire from a 14-3 romex is NOT a neutral. Ask us if you're not sure about the wiring, we'll help quickly!

How to include the Z-Wave Plus S2 On / Off switch to your smart home hub?

1. Make sure the switch is installed within range of your Z-Wave network
2. Put your Z-Wave hub in inclusion/pairing mode
3. Tap the upper paddle of the switch 3 times quickly to finalize the inclusion process
4. A new on/off switch will appear on your controller's device list

 NOTE:  Follow an appropriate diagram from the manual to wire the switch in a 3-way or 4-way setting with a regular electrical switch if you are looking to control one light with 2 or 3 switches. If you can't match your wiring with any of the diagrams, let us know and we'll walk you through the wiring process.

WORKS WITH

• 2GIG (no advanced settings available)
• Abode
• ADT Pulse (no advanced settings available)
• Almond (Securify)
• Fibaro Home Center 2
• Fibaro Home Center Lite
• Home Assistant (works best with device specific code, install here)
• HomeSeer
• Hubitat
• InControl
• Indigo
• ISY994Zw
• openHAB
• Open Z-Wave
• Piper (no advanced settings - on/off control only)
• Ring (no advanced settings or scene control)
• SmartThings Hub (no advanced settings or scene control on the new lua platform)
• Staples Connect DLink (no advanced settings - on/off control only)
• VeraEdge Z-Wave Gateway Controller (no scene control)
• VeraPlus Z-Wave Plus Advanced Home Controller (no scene control)
• VeraSecure Z-Wave Plus Advanced Smart Home Security Controller (no scene control)
• Wink and Wink 2 (no advanced settings)
• Zipato Z-Wave Zipabox Smart Home Controller
• Zipato ZipaTile Home Automation Controller

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120 VAC, 60 Hz
• Maximum Load: 8 A, 150 W LED/CFL, 600 W incandescent
• Z-Wave Range: Up to 100 feet line of sight
• Operating Temperature: 32-104° F (0-40° C)
• Installation: Indoor use only

RESOURCES

Download the Manual for Zooz Z-Wave Plus S2 On / Off Wall Switch ZEN26 (PDF)