NOTE: Z-Wave gateway controller required - sold separately. *Your Z-Wave gateway needs to support advanced configuration to enable these features.
The Dome Door/Window Sensor can be used with virtually any opening within your home, including: garage doors, safes, cabinets, drawers, and safety gates for small children.
While paired with your Z-Wave gateway controller, receive text/email notifications and alerts when something is opened unexpectedly. Use your smart phone or computer to check statuses while you’re away.
Connect the sensor with other Z-Wave devices to take your smart home to the next level: as you open your basement door, turn on your smart lights automatically. If a safe is opened, trigger your Z-Wave alarm siren to better protect your home and valuables. This sensor is tiny, with a 3-year battery life, so rest assured it will be worry-free and out of sight.
Installing your Dome Door/Window Sensor has 2 steps: inclusion and mounting. First you’ll need to include the sensor into your Z-Wave network:
To remove/exclude the sensor from your network, follow the same steps above but with your controller in exclusion mode.
Now you’re ready to mount the sensor on the opening of your choice. You can use either the pre-applied double-stick tape or the included screws. To expose the screw holes, remove the cover and battery from the sensor and magnet.
Affix the sensor onto the moving part of the opening (so the door, window, drawer, etc). Mount the magnet onto the fixed part, i.e. the frame. Be sure that the sensor and magnet are less than 1/2” apart from each other in the closed position. Also ensure that the lines on each part are aligned properly.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.