Aeotec 700 Series Z-Wave Plus Range Extender 7 ZW189

700 Series Repeater

PRODUCT HIGHLIGHTS

• Repeats and amplifies Z-Wave signal for your mesh network
• More range than ever with the new 700 series Z-Wave chip
  
• Supports Explorer Frames and beaming technology
• Quick set-up: simply plug it in and add to your hub
• Small size: doesn't block the second outlet
• S2 Authenticated security and SmartStart

NOTE: Z-Wave gateway controller required - sold separately.

HOW IT WORKS

The Aeotec Range Extender 6 uses 700-series Z-Wave to expand your network to the farthest reaches of your property. With a range of up to 400 feet, use it to connect tough-to-reach spots to your Z-Wave hub, like outdoor sensors whose signals may be shortened by thick walls, glass, and metal elements.

Use it to give your smart door lock a boost if you’re having trouble keeping it online. Add it between your hub and devices in outside structures for more thorough monitoring and control. Or simply install it in an area with any far-away or older generation Z-Wave device to stabilize connectivity depending on the specific structure of your home and layout of your network. 

Just plug it into a standard receptacle and add it to your Z-Wave hub for an instant power boost; at 1.8 inches wide on both sides, it will not interfere with any neighboring outlet. As a 700-series device, it comes with the latest advancements to the protocol and includes S0 and S2 securities to ensure your network remains secure. 

INSTALLATION

Set up couldn’t be simpler. Choose the receptacle you’d like to use to power the Range Extender 6. Once plugged in, put your Z-Wave hub into inclusion mode. Refer to your hub’s instructions to initiate inclusion as every hub is different. Once you see the hub is looking for new devices to add, you can add the device non-securely or securely. 

To add it in non-secure mode, press the Z-Wave button once. The LED indicator will light up solid green for two seconds to indicate it was successfully added non-securely.

To add it in secure mode, press the Z-Wave button twice quickly. The LED indicator will light up solid blue for two seconds to indicate it was successfully added securely.

Once the device is included to your hub, no additional programming is needed; it will begin repeating Z-Wave signals upon inclusion. We just recommend that you refresh your network so that the hub can find the most efficient path to each device with the Range Extender 6 included.

WORKS WITH

NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

SPECIFICATIONS

• Z-Wave Frequency: 908.42 MHz (US)
• Power: 120V 60Hz, Max. 0.8W
• Operating Temperature: 32 - 104 F (0 - 40 C)
• Operating Relative Humidity: 8 - 80%
• Z-Wave Range: up to 400 feet (line of sight)
• Dimensions: 1.6” x 1.6” x 1.4"
• Weight: 2 oz
• Installation: Indoor Only

RESOURCES

Download the Aeotec 700 Series Z-Wave Plus Range Extender 7 ZW189 User Manual