Zooz Z-Wave Plus 700 Series 4-in-1 Sensor ZSE40

$36.95 $44.95

| /

Z-Wave Frequency & Product Condition (See full condition details below)
More selection specific details in description below.

Detect, Monitor & Protect

The Zooz ZSE40 is a Z-Wave Plus certified device


  • New ZSE40 700 series with the latest chip for more range and longer battery life
  • 4 different sensors in 1 smart device: motion, light, temperature, and humidity
  • Customize your sensor with 7 levels of motion sensitivity 
  • Easy-to-follow LED temperature notifications 
  • S2 Authenticated Security with SmartStart
  • Capable of advanced home automation when linked with other Z-Wave devices
  • Built-in tamper protection 
  • Fast and easy installation
  • Sleek, subtle design
  • 5-year warranty

    NOTE: Z-Wave gateway controller required - sold separately. You need a security enabled controller to take full advantage of the product.


    We may have this product available in open box, refurbished, or used condition - just check the variant buttons under the product price for availability. All of our recycled inventory has been tested for both manual and Z-Wave control and is fully functional at the time of shipment. Here is what you can expect when ordering your device:

    • NEW: brand new product, as delivered by the factory
    • OPEN BOX: like new item in excellent condition, it may come in partially damaged or not original packaging; all accessories included; hardware and firmware version may be different than the brand new device description
    • REFURBISHED: good condition, may show slight signs of wear, may not include all accessories (like product manual, battery may not be full, etc); hardware and firmware version may be different than the brand new device description
    • USED (FINAL SALE): used condition, may show signs of wear, may not include accessories (like product manual, batteries, or mounting hardware) or parts of the packaging; may show signs of wear like scratches; FINAL SALE: not eligible for return, replacement, or warranty service; hardware and firmware version may be different than the brand new device description

    Tested to be the quickest Z-Wave motion detector among multisensors for SmartThings, watch video here (start at 38:20 for the ZSE40 review):


    Temperature, humidity, light, and motion - these are some of the cornerstones that make a home comfortable, efficient, and safe. Now imagine having these things controlled by a single device. Brimming with features, the Z-Wave Plus 4-in-1 Sensor is an efficient solution for solid home protection.
    When linked to your Z-Wave gateway controller, monitor and control your home from your mobile device. Receive notifications when the temperature or humidity changes. Be alerted when motion is detected unexpectedly. This sensor has 7 levels of motion sensitivity, allowing you to customize its settings for your specific needs.
    The 4-in-1 sensor can even be programmed for advanced home automation when connected to other Z-Wave products - make the temperature decrease when the lights shut off, or link up this sensor with a Z-Wave siren for added smart home security.


    Setting up your 4-in-1 sensor is a fast, easy process. Just be sure to connect it to your Z-Wave network before mounting. To include the sensor:

    • Insert the CR123A battery and bring the device as close to your Z-Wave gateway controller as possible 
    • Switch your Z-Wave controller into inclusion/pairing mode 
    • Press and release the Z-Wave button TWICE quickly with a paperclip
    • The new 4-in-1 sensor will appear on your controller’s device list
    • To disconnect it from your Z-Wave network, simply repeat the steps above but with your Z-Wave controller in exclusion/unpairing mode. Next, take the batteries out and put them back in. The LED indicator should flash 3 times, indicating the device has been successfully excluded. 
    • If the LED indicator blinks only once when you re-insert the batteries, please repeat the process above.

      To mount the sensor, choose a spot inside your home - at least 7 feet above the ground will yield the best results. With the 2 included screws, attach the mounting bracket to any flat surface - on your basement ceiling, in the corner of your entry hall, wherever you’d like. Once the bracket is secure, slide the 4-in-1 sensor into position and tilt the body in the direction of your choice.

      Or use the supplied adhesive tape to quickly mount the sensor on any clean surface indoors.


        • Z-Box Hub (recommended for Zooz products)
        • Almond (Securify)
        • eedomus
        • Home Assistant (Z-Wave JS)
        • HomeSeer
        • Hubitat 
        • ISY
        • Jeedom
        • SmartThings (register your product here to access the custom lua driver for advanced functionality)

      NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.


        • Z-Wave Frequency: 908.42 MHz (US, CA, MX) / 921.4 MHz (AU, NZ) / 868.42 MHz (EU) - choose your region before adding this product to cart
        • Power: 1 CR123A battery (included)
        • Wireless Range: Up to 300 feet line of sight
        • Operating Temperature: 5° - 104°F
        • Weight: 2.0 oz
        • Dimensions: 2.25" x 2.25" x 1"
        • Installation: Indoor Use Only


      Zooz ZSE40 700 Series Z-Wave 4-in-1 Sensor Manual (PDF)


      Customer Reviews

      Based on 116 reviews Write a review