The ZWN-RSM2 can be used independently for Z-Wave signal control only or connected to an existing wall switch for added manual control. This module brings wireless functionality to 2 separate loads and is a great solution for double gang boxes which tend to get crowded and can not always host two single micro switches. Plus you save $$$ by getting one device instead of two!
The product will work with a certified open Z-Wave gateway which supports the multi-level command class. See below for compatibility guide. Controller sold separately.
Wire the switch according to the diagram in the user manual. Check for neutral connection, making sure you have all the wires identified properly. If you are not confident how to wire the micro module, please consult a licensed electrician. It's easy to damage a Z-Wave device when any of the required wiring is missing or mismatched.
Inclusion/Exclusion: Make sure your module is wired correctly and works well when operated manually. Do not close the box before you add the module to your network.
Note: If your controller recognizes only one of the two switches/loads connected to the module, it's possible that it does not support the multi-level command classes needed for the device to function correctly.
Having trouble including the ZWN-RSM2 to your network? Contact Us for help!
NOTE: If you don't see your Z-Wave controller on the list above, please let us know before you purchase this product.
SAVE $50 WITH THIS VALUE PACK! PRODUCT HIGHLIGHTS Endless applications - add wireless functionality to any...
$89.90 - Sold Out
SAVE $10 WITH THIS VALUE PACK! Product Highlights 6-in-1 sensor: motion, humidity, temperature, light, UV,...
$89.90 - Sold Out
SAVE $10 WITH THIS DEAL! PRODUCT HIGHLIGHTS Z-Wave enabled plug-in alarm siren Powerful 106dB speaker 3...