Replace your regular wall switch with Z-Wave On/Off Light Switch and remotely control the lights in your home from anywhere, anytime. Use your smartphone, tablet, or PC to activate lighting scenarios or turn each light on or off. Set up a lighting scene to fit your schedule or activities – turn on the lights upon your arrival, when it gets dark, or to set the right mood. The switch is perfect for modern energy management.
The product also acts as a Z-Wave repeater to extend the range of your devices. In addition, the device has a built-in air-gap switch, allowing you to fully disconnect power when replacing light bulbs for added safety.
Connect the Z-wave Light Switch according to the diagram in the user manual. Remember that neutral wire is necessary for successful installation. Consult a licensed electrician if you are unable to identify the wiring in your gang box. Z-Wave switches need to be wired correctly on the first try - it is extremely easy to damage the unit by applying incorrect wiring.
Check connections to ensure they’re tight and that no bare conductors are exposed. Fix the Z-Wave switch into the standard gang box using the supplied screws. Attach the wall plate and restore power.
Add the switch to your Z-Wave network. Bring the hub as close to the switch as possible. Put your Z-Wave controller in inclusion mode and tap the switch once.
Looking to install the switch in a 3-way setting? You will need the ZW3K add-on switch for additional manual control.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
SAVE $50 WITH THIS VALUE PACK! PRODUCT HIGHLIGHTS Endless applications - add wireless functionality to any...
$89.90 - Sold Out
SAVE $10 WITH THIS VALUE PACK! Product Highlights 6-in-1 sensor: motion, humidity, temperature, light, UV,...
SAVE $10 WITH THIS DEAL! PRODUCT HIGHLIGHTS Z-Wave enabled plug-in alarm siren Powerful 106dB speaker 3...