Create the ideal ambiance in your home, associate lighting with other events, or program any special scenes with the Z-Wave Light Dimmer Switch. It can replace your regular on/off or dimmer switch and allow you to remotely control your wired lights up to 500W from anywhere using your smartphone or tablet when using a Z-Wave gateway controller (sold separately).
The built-in air-gap switch allows you to disconnect power when replacing light bulbs for extra safety. The dimmer can be used alone or with the ZW3K Auxiliary Switch (sold separately) for 3-way multi-location control.
Install as a new device or replace an existing dimmer wall switch. Be sure to turn off all power (at fuse or breaker) before starting. If you’re not comfortable working with electrical wiring, please consult a qualified electrician.
Remove the existing wall plate, screws, and switch from the outlet box and disconnect all wires. Connect the Z-Wave Light Dimmer as shown on the wiring diagram. Check connections to ensure there are no bare conductors. Insert the device into the outlet box and install using supplied screws. Attach the wall plate and restore power to test.
Add and set up the device on your network using your Z-Wave controller. Bring the hub as close to the dimmer as possible. Put your Z-Wave controller in inclusion mode and tap the switch once.
Looking to install the switch in a 3-way setting? You will need the ZW3K add-on switch for additional manual control.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
CLASSIC TOGGLE WITH Z-WAVE PLUS! PRODUCT HIGHLIGHTS Turn lights and small appliances on or off via...
ENHANCED DIMMER SWITCH PRODUCT HIGHLIGHTS Manual or remote on/off control and dimming from your mobile device...
$29.95 - Sold Out
FOR SECURITY AND CONVENIENCE PRODUCT HIGHLIGHTS 360 Degree Ceiling Mounted Sensor - Coverage up to 600...