Replace your regular electric outlet with the ZW15R Z-Wave Duplex Receptacle and gain additional control of all plugged-in devices. You can remotely control any appliance up to 15A that you plug into your three-prong outlet—lamps, fans, heaters, or lights—from your mobile device or PC. Programmable and customizable, this is the ideal device for energy management or personalized home automation setup.
The receptacle is tamper-resistant. The blue LED light on face cover can indicate status of the device (on/off) as well as act as a night light. One outlet is Z-Wave enabled, while the other supplies constant power.
Note: Z-Wave gateway controller (sold separately) is required for the product to function as designed.
Make sure the power is off before beginning installation. Remove the existing receptacle from the wall.
Connect the Z-wave Duplex Receptacle as shown in the diagram from the user manual.
Check connections to ensure they’re tight and that no bare conductors are exposed.
Install the Z-Wave Duplex Receptacle into the standard outlet using the provided screws.
Attach the wall plate and restore power.
Add the receptacle to your Z-Wave network using your Z-Wave controller. Send a pairing command from your hub. Then press and release the program button on the receptacle. Your installation is now complete.
NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.
Z-Wave Frequency: 908.42 MHz (US)
Power: 120VAC, 15A
Wireless Range: up to 100 feet
Operating Temperature: 32°-104°F (0°-40°C)
Dimensions: 4.6 x 3.1 x 2.5 inches
Weight: 7.2 oz
CLASSIC TOGGLE WITH Z-WAVE PLUS! PRODUCT HIGHLIGHTS Turn lights and small appliances on or off via...
ENHANCED DIMMER SWITCH PRODUCT HIGHLIGHTS Manual or remote on/off control and dimming from your mobile device...
$29.95 - Sold Out
FOR SECURITY AND CONVENIENCE PRODUCT HIGHLIGHTS 360 Degree Ceiling Mounted Sensor - Coverage up to 600...