This plug-in ON/OFF Module is a transceiver which is a Z-Wave enabled device and is fully compatible with any Z-Wave enabled devices displaying the Z-Wave logo can also be used with it regardless of the manufacturer, and ours can also be used in other manufacturer's Z-Wave enabled networks. Remote ON/OFF control of the connected load is possible with other manufacturer's Wireless Controller. Each module is designed to act as a repeater. Repeaters will re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.
This plug-in ON/OFF Module is able to detect current wattage (5~1440W) and overload wattage of connected non-dimmable lights and appliances. When detecting overload state, the Module will be disabled and its On/Off button will be locked out of which LED will flash quickly for 30 seconds. However, unplug and re-connect the Module will will reset its overload condition to normal status.
Frequency Range: 908.42 MHz
Operating Voltage: 120V/60Hz
Maximum Load: 1440W Resistive
Effective Range: 30 meters (98.4252 Foot) indoors -Open Space
Operating Temperature: 0C - 40C (32F - 86F)
Oprating Humidity: 85%RH
Protection degree: Indoor use
FCC ID: FU5AN163
CLASSIC TOGGLE WITH Z-WAVE PLUS! PRODUCT HIGHLIGHTS Turn lights and small appliances on or off via...
ENHANCED DIMMER SWITCH PRODUCT HIGHLIGHTS Manual or remote on/off control and dimming from your mobile device...
$29.95 - Sold Out
FOR SECURITY AND CONVENIENCE PRODUCT HIGHLIGHTS 360 Degree Ceiling Mounted Sensor - Coverage up to 600...