Aeotec by Aeon Labs ZW074-A Z-Wave Plus 4-in-1 Multisensor Gen5

4 pieces of intelligence that you can bring to your Z-Wave network

The Aeotec by Aeon Labs MultiSensor Gen5 looks like a motion sensor and it acts like one too. But it’s also so much more. Installing this 1 piece of Z-Wave technology is the same as installing 4 pieces of Z-Wave technology. Your home control network will immediately understand motion, temperature, humidity and light readings wherever Multisensor installed. Those intelligent readings will equate to intelligence automation. And intelligent automation will give you the perfect, smart home.

Additional Information

Motion sensor.

Most motion sensors are used for security only, but with MultiSensor and the power of Z-Wave you can design all manner of intelligent scenarios from lighting control to the expected security monitoring.

Temperature sensor.

Monitor the temperature of a space and then use the power of MultiSensor to directly control, or get your Z-Wave system to control, the devices that’ll keep you comfortable.

Humidity sensor.

Temperature sensing is one thing, but humidity sensing brings a whole new level of intelligence to your home. Use it with Z-Wave to create the perfect, most comfortable spaces possible.

Light sensor.

Energy saving, safety, comfort. There a lot of things you can do with MultiSensor’s inbuilt light sensor, each of them offering an whole new level of intelligence, personalisation and perfection for Z-Wave.

Indoor sensor.

Whether it’s for comfort or security, attach it to a wall, sync it, and MultiSensor instantly provides your Z-Wave network with 4 unprecedented levels of intelligence.

Outdoor sensor.

Your Aeotec MultiSensor isn’t limited to the corner of a room. Designed to withstand the elements, MultiSensor brings the outdoors to your Z-Wave network.

Wireless sensor.

You can affix MultiSensor to your wall or ceiling with no more than a few screws. No wires. Nothing. MultiSensor can be a truly wireless sensor with batteries that’ll last a year and the reliability of Z-Wave’s wireless signal.

Powered sensor.

Of course a device for your wall made with just the right features offers more than just battery power. MultiSensor can be powered by mains electricity using a power adapter and the inbuilt mini-USB connector.


    • Power Suply: 4 x "AAA" Alkaline (NOT included) or 5V USB DC
    • Indoor/Outdoor use: Indoor/Outdoor Rating (IP42 - wet and dry conditions)
    • Humidity Sensor Range: 20% - 80%
    • Light Sensitivity: 0 – 1000 LUX
    • Motion Sensor Range: 0.5-6 meters (2-20 feet)
    • Frequency: 908.42 MHz
    • Signal Range: 500 feet / 150 meters Max line of sight between Wireless Controller and closest receiver module
    • Temperature Sensor Range: 14°F (-10°C) to 140°F (+60°C)
    • OTA Firmware Updatable: Yes


Aeon Labs ZW074-A Z-Wave Plus 4-in-1 Multisensor Manual Download (PDF)

ZW074-A Z-Wave Protocol Implementation Confirmance Statement (PDF)

Vendor: Aeotec

Pin It

Customer Reviews

Based on 1 review Write a review

Related Items