Aeotec by Aeon Labs Z-Stick LITE Z-Wave USB dongle Second Edition DSA07203-ZWUS

 The Aeotec Z-Stick Series 2 is a self-powered Z-Wave USB dongle with push button for remote network creation (independent from external power and host microprocessor). When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB.

This is a hardware unit only. You will need to install necessary drivers and home automation software of your choice to be able to use the product as a gateway Z-Wave controller.

  • Add/Remove Z-Wave products to your home network: This must be done through the host software which takes control of the Z-Stick USB adapter while the Z-Stick is in SerialAPI-Mode. Please consult the instruction manual of the host software to perform an inclusion or removal of Z-Wave nodes (i.e. "Add", "Include", "Pair", "Remove", "Exclude", etc.). This function can only be preformed via the host software.
  • Factory reset on the Z-Stick: This must be done through the host software which takes control of the Z-Stick USB adapter while the Z-Stick is in SerialAPI-Mode. Please consult the instruction manual of the host software to perform a network reset (i.e. factory reset on the Z-Stick). This function can only be preformed via the host software.
  • Add the Z-Stick to a pre-existing Z-Wave network: This must be done through the host software which takes control of the Z-Stick USB adapter while the Z-Stick is in SerialAPI-Mode. Please consult the instruction manual of the host software to add the Z-Stick to a pre-existing Z-Wave network (i.e. "Learn", "Sync", "Add as Secondary Controller", etc.). This function can only be preformed via the host software.

DOWNLOADS

Z-Stick Lite 2E Manual File in PDF Format


Vendor: Aeon Labs


Pin It

Related Items