FIBARO Z-Wave Plus Double Switch 2 FGS-223 ZW5 US

$49.95

| /

Easy, Invisible Z-Wave

FIBARO Z-Wave Plus Double Switch 2 FGS-223 ZW5 US is a Z-Wave Plus certified deviceThe Smartest House is an authorized distributor of FIBARO Z-Wave products

PRODUCT HIGHLIGHTS

  • Turn 2 light switches into Z-Wave with one small device and control each load individually (neutral wire required)
  • Compatible with resistive and incandescent loads up to 6.5 A, and high-quality LED or CFL bulbs
  • Reports energy usage in live mode (W) and over time (kWh)
  • Use it with on/off decora or paddle switches and momentary (push-button) in-wall switches
  • Association available for advanced home automation scenarios
  • Test Z-Wave range from the device with LED notifications
  • Remembers on/off state after power failure
  • Uses AES-128 encryption to protect your Z-Wave network
  • Made in Europe
  • 1-year manufacturer warranty

    NOTE: Z-Wave gateway controller required - sold separately.

    HOW IT WORKS

    Make your home Z-Wave capable without complicated and expensive changes to your gear. After installing into your wall switch box and including to your Z-Wave gateway controller, the FIBARO Z-Wave Plus Double Switch transforms 2 independent switches or outlets into Z-Wave devices. It's the perfect solution for a crammed switch box!

    You’ll be able to wirelessly control your lights and any connected appliance (up to 6.5 A, no motor loads) from the ease of your smart phone or computer. You’ll also be able to schedule scenes like automatically turning off the lights in the kids’ rooms every night. Have the Double Switch talk to other Z-Wave devices for a customized smart home setup — turn on the welcome lights as soon as your door/window sensor detects you’ve opened the front door.

    This Double Switch is compatible with a wide variety of switches, outlets, and bulbs. And depending on your specific gateway controller, it allows you to keep track of the power consumption of one appliance or all of them together, at any given moment and over time.

    INSTALLATION

    Before beginning the installation process, be sure to read the user manual thoroughly. If you’re uncomfortable with proceeding, please do not hesitate to contact a licensed electrician.

    First you will need to install the Double Switch to your wall switch box:

    1. Switch off your main circuit breaker (disable the fuse).
    2. Locate and open your wall switch box.
    3. Choose one of the diagrams below to follow, based on whether or not you have a Single or Double Switch 2, or a single or double wall switch. Please refer to the user manual for notes explaining the diagrams further.
    4. Verify all connections are wired correctly and turn the power back on.
    5. Include the Double Switch to your Z-Wave network. (See below)
    6. Turn power off at circuit breaker again and arrange the Double Switch and its antenna to fit inside your switch box.
    7. Close the wall switch box and turn the power back on.

    Fibaro Z-Wave Plus Double Switch 2 FGS-223 ZW5 US Wiring Diagram
    To include the Double Switch from your Z-Wave network:

    1. Check if the switch is within the range of your existing Z-Wave network.
    2. Locate the S1 button.
    3. Put your Z-Wave controller into inclusion/pairing mode (refer to your controller’s manual, as each device is different).
    4. Press the S1 button 3 times quickly.
    5. When the Double Switch has been added successfully, you will see the new device on your controller’s device list.

    WORKS WITH

    NOTE: If you don't see your Z-Wave controller on the list above, please contact us before you purchase this product.

    SPECIFICATIONS

    • Z-Wave Frequency: 908.42 MHz (US)
    • Power: 110V
    • Maximum Resistive Load: 6A per channel (3A incandescent load per channel)
    • Overload Protection: External 10A circuit breaker required
    • Operating Temperature: 32- 95° F
    • Wireless Range: Up to 130 ft
    • Dimensions: 1.7" x 1.5" x 0.8"
    • Weight: 2.5 oz
    • Installation: Indoor Use Only

    RESOURCES

    Download the Manual for FIBARO Z-Wave Plus Double Switch 2 FGS-223 ZW5 US (PDF)

    Customer Reviews

    Based on 3 reviews
    100%
    (3)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    B
    Brad
    This switch solved my problem

    I needed a flush relay that would follow the state of the physical light switch. Other flush switches would just change the state. So if the physical light switch was the off position and the flush switch had been turned on by the Z wave network, turning the physical switch on would actually turn the light off. This has an option to follow the state of the physical switch. Tech Support at The Smartest House was instrumental in researching their products and recommending the right one.

    D
    Dave
    Does everything I need it to and high quality

    This was my first Fibaro device. I bought the dual relay to replace another brand z-wave relay that had been installed into a motion detector flood light setup. In the original setup, my SmartThings hub could turn on the floodlights or the motion sensor could turn on the flood lights. The problem was that the trigger on the relay would only toggle the output, so if the hub turned on the lights and then the motion sensor triggered, since the lights were already on, the lights would turn off. The manufacturer did not have a way to reconfigure the trigger.

    I purchased the FIbaro dual relay to try and resolve this and the Fibaro worked great. It let me configure the trigger to follow the voltage, which means if the hub or manual switched turned on the lights, and then the motion sensor triggered, the lights would stay on. I also have the added bonus of a second relay and trigger which allowed me to isolate the motion sensor and control it from the hub.

    I will be trying out the Fibaro dimmer next. It seems that all of their relay/dimmer modules can work with a toggle switch or a momentary switch. along with following the voltage state and not toggling. I think they're are a little pricey, but then again they are highly configurable and seem to be built well.

    If you're using SmartThings, use the device handlers written by erocm1231. This will allow you to take proper advantage of the 2nd relay switch.

    D
    Dave
    UL Certified Dual Relay. Works great with SmartThings

    Great UL Certified Relay that works with SmartThings

    This is one of the only smart relays that is UL certified. Well built and works great with SmartThings hub.

    If using SmartThings you will need:

    1) Fibaro 223 Device handler by erocm123:
    Download: https://community.smartthings.com/t/new-fibaro-switches-fgs-213-223/56151/2

    2) Simulated Switch SmartApp by erocm123
    Download: https://community.smartthings.com/t/release-virtual-device-sync-create-virtual-devices-and-keep-them-in-sync-with-a-physical-device/57089

    Detailed Instructions: https://community.smartthings.com/t/release-virtual-device-sync-create-virtual-devices-and-keep-them-in-sync-with-a-physical-device/57089/34

    Pros:
    1) UL Certified
    2) Well built
    3) Very small so it can be easily hidden behind physical switches
    4) Easy to Setup with erocm123's device handler and smart app
    5) Excellent customer support from TheSmartestHouse who pointed me toward the Fibaro when I was looking for a dual relay switch that was also UL certified.

    Cons:
    1) It would have been nice if it included a few pieces of short electrical wire. Since this is going between existing wiring and switch you will need 4 short wires. One for L, N, S1, S2. Existing switch to light wiring will go to Q1 and Q2.