April 09, 2017 7 Comments
It’s easy to be wary of claims of long-lasting battery life, as so many products out there promise reliable and worry-free battery power and then fail to deliver. So when the Sensative Strips Door/Window Sensor arrived to the market – a sensor thinner than two credit cards stacked together, and featuring a brand-new kind of battery that lasts for 10 years – some of us were skeptical.
Sensative recently turned to Sony to put their product’s power consumption to the test with the help of Otii – a new energy-optimization tool that measures and analyzes the power consumption behaviors of battery-powered devices. Of its many useful features, it allows the user to pinpoint the cause of a draining battery by syncing the software’s debug output with its power readings. Otii’s findings confirmed that the battery in Strips can last much longer than 10 years with optimal configuration and network conditions.
March 14, 2017 1 Comment
We get a lot of inquiries from Wink users trying to connect Z-Wave devices which should "technically" work with their hub but are not listed on the device list in the Wink hub.
You can include most on/off Z-Wave products to Wink and Wink 2, including light switches, plug-in modules, dimmers, and even multi-channel devices such as our popular Zooz Power Strip which allows you to control 5 outlets individually.
Since Wink's support is not very obvious on how to include these "generic" Z-Wave devices to your network, we created this step-by-step guide with easy-to-follow instructions and screenshots to make everything super clear.
We hope it helps you enjoy your Z-Wave system even more!
September 14, 2016 2 Comments
The Fibaro Dimmer 2 has been available in Europe for quite some time and listed on the Fibaro US website as “coming soon” for too many months to count. Fibaro has made several of their Z-Wave devices available in the states (RGBW controller, Motion sensor, Flood sensor, etc.) and all of them have generally been well received. The company really does set a high standard for quality home automation devices. So, with that being said, does the Dimmer 2 live up to the Fibaro name and was it worth the wait? Read on to find out if this device stands out in the crowded IoT market.
The size of the Dimmer 2 quite a bit smaller than the Aeon Labs Micro Dimmer (the competing US in wall dimmer). This will make it a little easier to fit into your switch box. One thing that sets this device apart is that it has two switch ports (labeled S1 & S2). There are a couple different uses for the second switch port, so it is a great addition to have. Read more
July 15, 2016 18 Comments
For those of us interested in home automation, this might be a familiar scenario: You’ve bought that new 4-in-1 sensor you’ve wanted for a while, and rush to unwrap the package like a kid on Christmas Day. Then you insert the batteries and make your way to your SmartThings hub to include it into your network. And then the disappoint descends: it’s a sensor that’s new on the market, and it’s more complicated than a simple on/off device. It will probably take a while before SmartThings provides official support for it. So how do you include a Z-Wave device to your hub if it's not on the list?
This is where custom device handlers come in: community members will often develop their own code to be able to use new devices with SmartThings. They usually publish them on development platforms like GitHub and then post a link to the code on the SmartThings forum. But they don’t always include instructions on how to install the custom device handler and assign it to the device. The average user may think it’s a complicated process, when in fact it’s quite simple! Read more
June 24, 2016 2 Comments
Zooz is a relatively new name in the home automation industry, but their competitive prices and good-quality products have given them a fast following. Along with their Indoor Siren and 4-in-1 Sensor, the ZSE02 Motion Sensor is just one of their answers to smart home security.
As far as specs go, the ZSE02 has a detection radius of up to 23 feet in all directions. I think this a suitable range for most homes, especially considering the motion sensor in Aeotec’s MultiSensor 6 can only claim 16 feet (the trade off is that the 6-in-1 is smaller and senses more things — this is a good lesson in custom home automation: go with the products that best suit your goals, priorities, and lifestyle). It also has a wireless range of 100 feet, line of sight, so it should have no problem communicating with your other Z-Wave devices — a super important aspect of home security. Read more
July 07, 2015 19 Comments
As we're all waiting for the new Aeotec MultiSensor 6 to be officially added to the list of supported devices by all major Z-Wave gateways, I have been testing and researching a way to properly include the device to my VeraEdge. I was finally able to configure 4 basic child sensors a couple of days ago. It looks like another few weeks before we see the UV and vibration sensors on Vera's interface but all other 4 are functional after a quick manual fix.
March 14, 2015 16 Comments
The new Vera firmware upgrade is here with 4 new features, 20 improvements and too many resolved bugs to count. But are they really all gone? We were especially excited to see the Aeotec recessed door window sensor (ZW089-A) on the checklist as seemingly issue-free. It would be a sign of Vera finally embracing the Gen5 and Z-Wave Plus features. So we got right to testing the Aeotec ZW089-A on both our VeraEdge and VeraLite under the UI7.0.5. The sensor didn’t work immediately but with this quick fix, you’ll be able to fully control the Aeon Labs ZW089-A with your Vera.